Danfoss PAHT G 10 분해 및 조립 - 페이지 5

{카테고리_이름} Danfoss PAHT G 10에 대한 분해 및 조립을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss PAHT G 10 20 페이지.

Instruction

Disassembling and assembling PAH 10-12.5, PAHT 10-12.5 and PAHT G 10-12.5

13.

Loosen the valve plate using two screw-

drivers. Place one of the screwdrivers in the

slot of the valve plate.

15.

Remove the five O-rings and the five

back-up O-rings.

17.

Wash all parts and replace all seals

(inclusive shaft seal).

19.

If the pump has failed, the reason for the

failure must be found and fixed before the

repaired pump is re-installed.

180R9095 / 521B0986 / DKCFN.PI.010.NA3.02 / 09.2013

14.

Remove the valve plate.

16.

Remove the port plate from the flange.

18.

Inspect all parts carefully (see "Inspection")

and replace any worn parts.