Dunlop CBJ95 매뉴얼 - 페이지 3

{카테고리_이름} Dunlop CBJ95에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dunlop CBJ95 4 페이지.

BASIC OPERATION

POWER

The Cry Baby

Junior Wah is powered by one 9-volt battery

(accessed via the bottom of the pedal), the Dunlop ECB003

9-volt adapter, or the DC Brick

power supplies.

OPERATION

1. Run a shielded instrument cable from your guitar to the

CBJ95's INSTRUMENT jack.

2. Run another shielded instrument cable from the CBJ95's

AMPLIFIER jack into your amplifier input.

3. Turn on the amplifier and begin playing.

4. To turn the pedal on/off, push the top of the pedal down

until you hear a "Click".

5. Located under the rocker at the heel of the pedal is an

adjustable torque clutch that allows the amount of resistance

the rocker has to being moved. Turn clockwise to increase

resistance or counterclockwise to decrease resistance (wrench

included). See TORQUE ADJUSTMENT diagram.

6. The VOICING switch allows you to change the frequency

range of the CBJ95. Default setting is H—High, for the

standard GCB95 sound. For a more vintage, midrange-focused

sound, set the switch to M. For a lower frequency range, select

L. See VOICING SWITCH diagram.

7. By rocking your foot back and forth on the mini pedal, you

can instantaneously change the effect that the Cry Baby Wah

has on the tone of your instrument.

TORQUE ADJUSTMENT

, Iso-Brick

, and Mini Iso-Brick

™

VOICING SWITCH

H 380 Hz to 2100 Hz

M 330 Hz to 1800 Hz

L 270 Hz to 1500 Hz

™

CBJ95 CRY BABY

JUNIOR WAH