Dunlop CRY BABY MINI 535Q WAH 매뉴얼 - 페이지 3

{카테고리_이름} Dunlop CRY BABY MINI 535Q WAH에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dunlop CRY BABY MINI 535Q WAH 4 페이지.

BASIC OPERATION

POWER

The Cry Baby Mini 535Q Wah is powered by one 9-volt battery

(remove bottom plate to install), or an AC adapter such as the

Dunlop ECB003/ECB003EU, or the DC Brick

and Iso-Brick

™

power supplies.

OPERATION

1. Run an instrument cable from your guitar to the CBM535Q's

INSTRUMENT jack and another instrument cable from the

CBM535Q's AMPLIFIER jack into your amplifier's input.

2. Push the toe of the pedal down until you feel a "click" to turn

the pedal on/off.

3. Use the RANGE SELECTOR switch to select one of four

frequency ranges. See RANGE SELECTOR diagram.

4. Rotate the Q knob clockwise for a narrower bandpass to

emphasize higher end harmonics or counterclockwise for a

wider bandpass that emphasizes lower end harmonics.

5. To increase the CBM535Q's output, engage the BOOST switch

and rotate the VOLUME knob clockwise to increase the amount

of gain, up to +16dB, or counterclockwise to decrease it.

6. Rock your foot back and forth on the pedal to hear the vocal,

expressive tones that the Cry Baby Wah is famous for.

CBM535Q CRY BABY

MINI WAH