Dunlop M169 매뉴얼 - 페이지 2
{카테고리_이름} Dunlop M169에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dunlop M169 2 페이지. Analog delay
페이지 인쇄
M169 CARBON COPY
ANALOG DELAY
®
POWER
DESCRIPTION
The Carbon Copy Analog Delay
• 100% analog bucket-
is powered by one 9-volt battery
brigade technology
(remove bottom plate to install),
• Up to 600ms of delay with
a 9-volt AC Adapter such as the
switchable modulation
Dunlop ECB003/ECB003EU, or
• Internally adjustable
the DC Brick
modulation circuit
power supplies.
• True bypass
CONTROLS
MOD switch toggles modulation
on/off (blue LED indicates on)
MIX knob controls blend of
wet and dry signals
REGEN knob sets number
of repeats
DELAY knob sets delay time
FOOTSWITCH toggles
effect on/bypass (blue LED
indicates on)
DIRECTIONS
• Run a cable from your guitar
to the M169's INPUT jack and
another cable from the M169's
OUTPUT jack to your amplifier.
• Start with all controls at
and Iso-Brick
™
™
12 o'clock.
• Turn the effect on by depressing
the footswitch.
• Rotate the REGEN knob clock-
wise to increase the number of
repeats or counterclockwise to
decrease it.
• Rotate the MIX knob clockwise
to increase the ratio of wet to dry
signal or counterclockwise to de-
crease it. Fully clockwise results
SAMPLE SETTINGS
MEMPHIS SLAP
in half wet/half dry mix while fully
counterclockwise results in
100% dry signal.
• Rotate the DELAY knob clockwise
to increase delay time or counter-
clockwise to decrease it.
• Push in the MOD switch to add
modulation to your delay signal.
Modulation width and speed
can be adjusted internally
(remove bottom plate) with
a 3mm slotted screwdriver
(see Diagram A).
DIAGRAM A
GOLDEN AGE
SKANK'N DUB
GUITAR GOD
SPECIFICATIONS
Input Impedance
1 MΩ
Output Impedance
1 kΩ
Max Input Level
+5 dBV,
500 Hz
Max Output Level
+8 dBV
Noise Floor*
Mix at Max CW
-96 dBV
Mix at Max CCW
-104 dBV
Delay Distortion
<1%, 1 kHz,
-5 dBV Input
Delay Time
20 ms to
600 ms
Noise Reduction
2:1 ratio
Modulation Speed
0.2 Hz to
2.2 Hz
Bypass
True Hardwire
Current Draw
26 mA
Power Supply
9 volts DC
*Regen at max CCW, A-weighted
P.O. BOX 846, BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
DUNLOP MANUFACTURING, INC.