Danfoss 176F4046 설치 매뉴얼 - 페이지 8

{카테고리_이름} Danfoss 176F4046에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss 176F4046 16 페이지. In-back/out-back cooling kit for fa09-fa10, frequency converters

페이지 인쇄

In-back/Out-back Cooling Kit for FA09-FA10

Installation Guide

8x Ø 7 (0.3)

Illustration 6: FA10 Cabinet Backplate Template for In-back/Out-back Cooling

2.5 Installing the Top Cover

To install the top cover of the cooling kit, use the following steps. See

Procedure

Remove the paper backing from the top cover gasket to expose the adhesive.

Adhere the top cover gasket to the underside of the top cover.

Remove 8 M5x14 screws (T25) surrounding the sides and back of the vent in the top of the frequency converter. Retain the

screws.

Remove 3 M5x12 screws (T25) at the front of the vent in the top surface of the frequency converter.

Slide the edge of the top cover under the 3 loosened screws, positioning the cover over the vent in the top of the frequen-

cy converter.

Secure the top cover to the frequency converter with the M5x14 screws (T25) removed previously in step 3.

Torque all screws to 2.3 Nm (20 in-lb).

352 (13.8)

11 (0.4)

15 (0.6)

360 (14.2)

12 (0.5)

163 (6.4)

188 (7.4)

853 (33.6)

12 (0.5)

212 (8.3) 236 (9.3)

Illustration

Installation

AN371942471353en-000101 / 136R0248