Danfoss 176F4186 설치 매뉴얼 - 페이지 3
{카테고리_이름} Danfoss 176F4186에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss 176F4186 6 페이지. Ground bar kit for fk09/fb09 and fk10/fb10, ic7 series frequency converters
페이지 인쇄
Ground Bar Kit for FK09/FB09 and FK10/FB10
Installation Guide
2.2 Replacing the Side Brackets
Before installing the ground bar, use the following steps to replace the existing brackets with the brackets from the kit.
1.
Remove the existing side brackets by removing 2 screws (T25) from the cabinet exterior, 1 from the left bracket and 1 from
the right bracket. See
Illustration 1: Removal of Existing Side Brackets
2.
Attach the new left bracket by fastening 1 M5x12 screw (T25) through the side panel of the cabinet and into the bracket.
Repeat for the right bracket.
The left and right brackets differ from each other. See
Danfoss A/S © 2022.10
Illustration
1.
Illustration 2
for the positioning of each bracket.
Installation
AN422434236428en-000201 / 136R0288 | 3