Danfoss IP21/Type 1 Conversion Kit 설치 지침 - 페이지 2
{카테고리_이름} Danfoss IP21/Type 1 Conversion Kit에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss IP21/Type 1 Conversion Kit 2 페이지. Enclosure sizes j6 & j7 vlt automationdrive fc 360
페이지 인쇄Installation
1.
Mount the top cover on the top of the frequency
converter.
2.
Fasten with 4 screws, 2 screws on each side.
3.
Tighten the screws to 1.5 Nm (13.3 in-lb).
1
Top cover
Illustration 1.1 Mounting the Top Cover
4.
Mount the conduit box on the bottom of the
frequency converter.
5.
Fasten with 2 screws, 1 screw on each side.
6.
Tighten the screws to 1.5 Nm (13.3 in-lb).
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on
order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss
and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Danfoss A/S
Ulsnaes 1
DK-6300 Graasten
vlt-drives.danfoss.com
130R0679
1
1
MI06V102
*MI06V102*
Conduit box
Illustration 1.2 Mounting the Conduit Box
7.
Mount the conduit cover on the bottom of the
frequency converter.
8.
Fasten with 2 screws, 1 screw on each side.
9.
Tighten the screws to 1.5 Nm (13.3 in-lb).
Conduit cover
Illustration 1.3 Mounting the Conduit Cover
12/2015