Casio QW1382 일반 매뉴얼 - 페이지 4
{카테고리_이름} Casio QW1382에 대한 일반 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Casio QW1382 5 페이지.
페이지 인쇄How time is kept in the World Time Mode
When you set the time for any time zone, all other zones are adjusted
accordingly. The World Time Mode time setting can be made manually or by
Auto Receive of the time calibration signal. When Auto Receive is turned on
in the Timekeeping Mode, successful receipt of the time calibration signal
causes all World Time Mode times to be adjusted in accordance with Berlin
time.
The manual time setting procedure can also be used to turn daylight saving
time (DST) on and off. When daylight saving time is turned on, time settings
are automatically advanced one hour.
• With daylight saving time, clocks are set one hour later in order to better
take advantage of daylight hours during the summer, when days are longer.
Whether or not daylight saving time is used depends on the country you are
in.
• See "TIME CALIBRATION SIGNAL RECEPTION" for details on automatic
time signal reception.
To set the World Time manually
1. In the World Time Mode, press A or D to
A
L
scroll through the time zones and find the
one you want.
B
2. Press B and the DST On/Off setting
flashes on the display because it is
DST
P
C
DST
D
selected .
• The DST indicator flashes along with the
DST indicator
current on/ off setting.
3. Press C to change the selection in the following sequence.
DST On/Off
4. While DST On/Off setting is selected (flashing), press D toggle Daylight
Saving Time on (
On
) and off (
OFF
selected, press D to increase the setting and A to decrease it.
• Holding down either button while the hour or minutes digits are selected
changes the setting at high speed.
• The 12-hour/24-hour format of the World Time matches the format you
select in the Timekeeping Mode.
5. After you set the time, press B to return to the World Time Mode.
To switch between standard time and daylight saving
time
1. In the World Time Mode, use A or D to display the time zone whose
standard/daylight saving time setting you want to change.
• You can make separate daylight saving time settings for each individual city.
2. Press B and the DST On/Off setting flashes on the display because it is
selected .
• The DST indicator flashes along with the current on/ off setting.
3. Press D toggle Daylight Saving Time on (
4. After you are finished making the setting you want, press B to return to
the World Time Mode.
• The DST indicator is on the display whenever you display a city for which
daylight saving time is turned on.
ALARM MODE
When the Daily Alarm is turned on, the alarm
Hourly time signal on indicator
sounds for 20 seconds at the preset time each
Mode indicator
day. Press any button to stop the alarm after it
A
L
starts to sound.
When the Hourly Time Signal is on, the watch
B
beeps every hour on the hour.
• If you do not operate any button for a few
minutes while in the Alarm Mode, the watch
C
D
automatically goes back to the Timekeeping
Hour : Minutes
Mode.
Alarm on indicator
To set the alarm time
1. Press B while in the Alarm Mode. The hour digits flash on the display
because they are selected .
• This operation will turn the Daily Alarm on automatically.
2. Press C to change the selection in the following sequence.
Hour
3. Press D to increase the selected digits or A to decrease them. Holding
down either button changes the selection at high speed.
• The format (12-hour and 24-hour) of the alarm time matches the format you
select for normal timekeeping.
• When setting the alarm time using the 12-hour format, take care to set the
time correctly as morning (no indicator) or afternoon (P).
4. After you set the alarm time, press B to return to the Alarm Mode.
Hour
Minutes
). While the hour or minutes digits are
) and off (
).
On
OFF
Minutes
To turn the Daily Alarm and Hourly Time Signal on and
off
Press D while in the Alarm Mode to change the status of the Daily Alarm and
Hourly Time Signal in the following sequence.
[Alarm ON Indicator/Hourly Time Signal ON Indicator]
Both ON
Both OFF
To test the alarm
Hold down A while in the Alarm Mode to sound the alarm.
STOPWATCH MODE
The Stopwatch Mode lets you measure elapsed
1/100 second
time, split times, and two finishes. The range
Mode indicator
of the stopwatch is 23 hours, 59 minutes, 59.99
seconds.
A
L
B
C
D
Hours
Seconds
Minutes
(a) Elapsed time measurement
D
D
D
Start
Stop
Re-start
(b) Split time measurement
D
A
A
Start
Split
Split release
(c) Split time and 1st-2nd place times
D
A
D
Start
Split
Stop
First runner
Second runner finishes.
finishes.
Record time of first runner.
HAND SETTING MODE
Use the following procedure to correct the ana-
Mode indicator
log time whenever it does not match the digital
time.
L
A
• If you do not operate any button for a few
minutes while in the Hand Setting Mode, the
B
watch automatically goes back to the
Timekeeping Mode.
P
C
D
To set the analog time
Current time
1. Press B while in the Hand Setting Mode,
and the mode indicator will start to flash on
the display.
2. Press D to move the hands of the analog timepiece forward or A to
move them back.
• Holding down either button moves the hands at high speed.
3. After you set the analog time, press B to return to the Hand Setting Mode.
ABOUT THE DIGITAL DISPLAY AREA
If the figures in the digital display area seem to
A
L
be continually changing, hold down C for about
three seconds until you hear the watch beep.
B
At this time the watch should return to the
Timekeeping Mode.
P
C
D
1382-4
Daily Alarm
Hourly Time
Only
Signal only
D
A
Stop
Clear
D
A
Stop
Clear
A
A
Split release
Clear
Record time of
second runner.