Casio CFX-9850GB PLUS 그래프 매뉴얼 - 페이지 4

{카테고리_이름} Casio CFX-9850GB PLUS에 대한 그래프 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Casio CFX-9850GB PLUS 12 페이지. 4. complex numbers
Casio CFX-9850GB PLUS에 대해서도 마찬가지입니다: 소프트웨어 설명서 (20 페이지), 사용자 설명서 (18 페이지), 커뮤니케이션 매뉴얼 (13 페이지), 프로그램 매뉴얼 (18 페이지), 첫 번째 매뉴얼 읽기 (13 페이지), 그래프 매뉴얼 (8 페이지), 그래프 매뉴얼 (12 페이지), 복소수 매뉴얼 (6 페이지)

Casio CFX-9850GB PLUS 그래프 매뉴얼

13-3 Drawing a Dynamic Graph

The following is the general procedure you should use to draw a Dynamic Graph.
1. Select or input a function.
2. Define the dynamic coefficient.
3. Assign values to each of the coefficients of the function.
4. Specify the range of the dynamic coefficient.
5. Specify the speed of the draw operation.
6. Draw the Dynamic Graph.
u u u u u To set Dynamic Graph conditions
1. Input the function you want to graph. Here we will edit a built-in function to
184
• This is a coefficient whose value changes in order to produce the different
graphs.
• If the dynamic coefficient is already defined from a previous operation, you can
skip this step.
• If the range of the dynamic coefficient is already defined from a previous
operation, you can skip this step.
• If the speed is already defined from a previous operation, you can skip this
step.
Example
To use Dynamic Graph to graph
A changes from 2 to 5 in increments of 1
Use the following View Window parameters.
Xmin
Xmax =
Xscale =
input our function.
5(B·IN)
c1(SEL)
= – 6.3
Ymin
6.3
Ymax =
1
Yscale =
y
x
2
= A (
–1)
–1 as the value of
= – 3.1
3.1
1
1
2 3 4 5 6