Dunster House ARIANE H4-2412BSH 설치 매뉴얼 - 페이지 14
{카테고리_이름} Dunster House ARIANE H4-2412BSH에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dunster House ARIANE H4-2412BSH 15 페이지. Heavy duty bike shed 2.4m x 1.2m (8ft x 4ft)
페이지 인쇄
STEP 14: FASCIA BOARD AND DIAMOND FINIAL
Items:
4x
ST-PT16701275.75.75 (Fascia board)
2x
ST-PT1680140 (Finial)
20x 35mm Screw
Installing the Fascia Boards and Finials
Front views
Fascia Board
STEP 15: PANEL JOINT TRIM
Items:
1x
ST-PT1945310 (Trim)
1x
ST-PT19451595 (Trim)
12x
35mm Screw
Installing the Panel Joint Trims
ST-PT1945310
Assembly Steps
14a) Position the fascia boards to the correct position as shown in the
diagram below. Fascia boards should be approx. 10mm above the roof felt.
Fix each fascia board to the wind brace by using 4x 35mm screws.
14b) Position the diamond finials to the correct position as shown in the
diagram below. Fix each diamond final onto the wind brace by using 2x
35mm screws.
ST-PT16701275.75.75
35mm Screw
Diamond Finial fixed
with 2x 35mm Screws
14a) Position the front and rear trims over the joints ensuring the distance
between the joint and edge of the trim are the same.
14b) Use 4x 35mm screws to secure ST-PT3535310 to the front of the panel
and 8x 35mm screws to secure ST-PT35351595 to the rear of the panel.
Pre-drill parts before fixing with screws
ST-PT1670120
Pre-drill parts before fixing with screws
Position of Fascia Boards
and Diamond Finials
ST-PT19451595
Page 14