Dunster House ATLAS P5-3030PRG 설치 매뉴얼 - 페이지 12

{카테고리_이름} Dunster House ATLAS P5-3030PRG에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dunster House ATLAS P5-3030PRG 15 페이지. Pergola

Panel CP2

M10x28 Washers

M10x110 Bolts

Step 1.

•

Position the Panel CP2 between the Posts as shown in the diagram below. Join two (2) Panel CP2 using (6)

60mm screws.

Connect the two panels to the Posts using (3) 60mm screws per panel.

•

Please Note:

•

Fix the ends panel first and space the centre panel between them. (option to add sealant between the panel and

the post)

•

There maybe a gap between the panels, which is covered by the external and internal trims.

Assembly Steps for Atlas Pergola 3.2m x 3.2m

Half height wall panels assembly

2973

2733

M10 Shield Anchors

60mm Screws

60mm Screw

View from inside

120

M10x110mm

bolt &washer

M10 shield anchor

(

16 hole 80mm deep required)

** Quantity of components will vary,

depending on your purchase.

•

Fix the panels into the concrete by drilling

16 holes 80mm deep (2 per panel) and

inserting the shield anchors into the

holes.

•

Fix the panels by inserting M10x110mm

bolts and M10 washers and tighten

until secure.

Panel

Concrete

Page 12