Dunster House ATLAS P5-3050PRG 설치 매뉴얼 - 페이지 11

{카테고리_이름} Dunster House ATLAS P5-3050PRG에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dunster House ATLAS P5-3050PRG 16 페이지. Pergola 3.2m x 5.2m

Panel CP1 & CP10

60mm Screws

M10x110 Bolts

Step 1.

•

Position the Panel CP1 and CP10 between the Posts as shown in the diagram below.

•

Join Panel together, using (5) 60mm screws.

•

Connect the two end panels to the Posts (5 screws each) and to the Beams with (2) 60mm screws per panel.

Please Note:

•

To fit the panel the braces has to be removed.

60mm Screw

Please Note:

•

Fix the ends panel first and space the centre panel between them. (option to add sealant between the panel and

the post)

•

There maybe a gap between the panels, which is covered by the external and internal trims.

Assembly Steps for Atlas Pergola 5.2m x 3.2m

Full height wall panels assembly

2519

2279

M10 Shield Anchors

M10x28 Washers

CP10 Panel

CP1 Panel

View from inside

M10x110mm

bolt &washer

M10 shield anchor

(

16 hole 80mm deep required)

** Quantity of components will vary,

depending on your purchase.

Fix the panels into the concrete base by drilling

16 holes 80mm deep (2 per panel) and

inserting the shield anchors into the holes.

Fix the panels by inserting M10x110mm bolts

and M10 washers and tighten until secure.

Panel

Concrete

Page 11