Dunster House H4-2436SSH 설치 매뉴얼 - 페이지 8

{카테고리_이름} Dunster House H4-2436SSH에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dunster House H4-2436SSH 16 페이지. Sanctuary i shed - 2.4m x 3.6m (8ft x 12ft)

STEP 2: BEARERS

Items:

12x ST-PT35352200 (BEARER)

MFP - 2200x1220x10

MFP - 2200x960x10

72X 35mm SCREWS (6/BEARER)

10x 50mm SCREWS

ST-PT35352200

Principle of floor board(s) installation

Use 35mm screws. Keep and equal distance between

screws. Use the same amount of screws per each

bearer.

Assembly Steps

Pre-drill parts before fixing with screws

2a) Ensure the base is level. Space bearers at the specified

distance as shown in the the diagram below (1.0). If the bearer

layout consists of double bearers, use 50mm screws to secure them

as shown in the image to the right (1.1)

2b) Secure the MFP to the bearers with 35mm screws all equally

spaced. There should be a 70mm space between the ends of the

bearer and the screw.

FRONT

Approx. 70mm

Joining double bearer (1.1)

Use 50mm screws

MFP - 2200x1220x10

MFP - 2200x960x10

35mm SCREW

50mm SCREW

Page 8