Dunster House H4-2442SSH 사용 설명서 - 페이지 8

{카테고리_이름} Dunster House H4-2442SSH에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dunster House H4-2442SSH 16 페이지. Sanctuary ii shed - 2.4m x 4.2m (8ft x 14ft)

페이지 인쇄

STEP 2: BEARERS

Items:

15x ST-PT35352200 (BEARER)

MFP - 2200x1220x10

MFP - 2200x440x10

90X 35mm SCREWS (6/BEARER)

10x 50mm SCREWS

Principle of floor board(s) installation

Use 35mm screws. Keep and equal distance between

screws. Use the same amount of screws per each

bearer.

Assembly Steps

Pre-drill parts before fixing with screws

2a) Ensure the base is level. Space bearers at the specified

distance as shown in the the diagram below (1.0). If the bearer

layout consists of double bearers, use 50mm screws to secure them

as shown in the image to the right (1.1)

2b) Secure the MFP to the bearers with 35mm screws all equally

spaced. There should be a 70mm space between the ends of the

bearer and the screw.

2200

FRONT

Approx. 70mm

Joining double bearer (1.1)

Use 50mm screws

50mm SCREW

35mm SCREW

Page 8