Dunster House Utopia 설치 매뉴얼 - 페이지 7

{카테고리_이름} Dunster House Utopia에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dunster House Utopia 10 페이지. Gazebo 2x2m mkii

Utopia Gazebo 2x2m MKII Installation Manual

Fix the 'roof panels' to the Gazebo frame.

Lift the 'roof panels' into position and fix the

supports of the panels to the frame of the

gazebo.

For each corner you are required to use

1x95mm screw per corner and fix by screwing

through the timber on the frame and into the

ends of the corner supports of the 'roof

panels'.

The middle supports of the roof panels are fixed

into place by screwing through the gazebo

frame and into the middle support using

2x70mm screws per roof panel.

This process is required for all 'roof panels'.

Corner support

1x95mm screw. Fix at an angle,

into the roof section support.

Join the 'roof panels' together.

Use 4x70mm screws to join the roof panels

together, in the positions shown in the diagram.

Make sure that the supports in the roof frame

line up and then fix into place.

Middle Support

2x70mm Screws

Roof Panel

Roof panel

70mm Screws

View from underneath, looking up

Page 6 of 9