Dunster House Atlas P3-3040PRG 설치 매뉴얼 - 페이지 6

{카테고리_이름} Dunster House Atlas P3-3040PRG에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dunster House Atlas P3-3040PRG 17 페이지. Pergola 4m x 3m

Assembly Instructions for Atlas Pergola 4m x 3m

Components required for Step 2

2x 140x45x2150.A

2x 140x45x2195.A

2x 145x145x2260.C

Step 2.

Using the same principles as shown in Step 1, position and fix the remaining beams and posts so that your

assembly matches the diagram below. Refer to the previous page for the plan view layout of the pergola.

Before securing the posts to the ground, use a spirit level to ensure that the posts are vertical and the beams are horizontal.

Now secure the pergola posts to the ground, using 1x 70x70x70mm Angle Bracket per post (fixings not supplied),

ensuring that the posts are plumb, beams are level and diagonals are equal.

Next, position and fix 2x 140x45x630.A onto each post. Use 2x M10x120mm Hex Head Screws and 2x M10x20mm

Washers to fix these.

140x45x630.A

120mm Screw

140x45x630.A

140x45x2195.A

140x45x630.A

140x45x2150.A

145x145x2260.C

Flush

M10x120mm

Hex Head Screws

and M10x20mm Washers

12x 140x45x630.A

24x M10x120mm Hex Head Screw

24x M10x20mm Washer

12x 120mm Screw

6x 70x70x70mm Angle Bracket

140x45x2195.A

140x45x630.A

145x145x2260.C

140x45x630.A

120mm Screw

140x45x2150.A

70x70x70mm Angle Bracket

Page 04