Danfoss BD50 장애 진단 및 FAQ
{카테고리_이름} Danfoss BD50에 대한 장애 진단 및 FAQ을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss BD50 4 페이지. Penguin refrigeration
페이지 인쇄
PENGUIN REFRIGERATION LTD
PENGUIN REFRIGERATION LTD
PENGUIN REFRIGERATION LTD
PENGUIN REFRIGERATION LTD
PENGUIN REFRIGERATION LTD
Unit 2b
Unit
Alexandria Park
Alexandria Park
Penner Road
Penner
T:
T: 02392 453293
02392 453293 F: 02392 453293
02392 453293 E: sales@ penguinfrigo.co.uk
www.penguinfrigo.co.uk
www.penguinfrigo.co.uk
www.penguinfrigo.co.uk
Danfoss BD 35 and 50F Fault Diagnostic.
Danfoss BD 35 and 50F Fault Diagnostic.
Danfoss BD 35 and 50F Fault Diagnostic.
Danfoss BD 35 and 50F Fault Diagnostic.
Danfoss BD 35 and 50F Fault Diagnostic.
Danfoss BD 35 and 50F Fault Diagnostic.
Danfoss BD 35 and 50F Fault Diagnostic.
The Danfoss BD35 and BD50 compressors have their own fault diagnostic allowing
The
anfoss BD35 and BD50 compressors have their own fault diagnostic allowing
anfoss BD35 and BD50 compressors have their own fault diagnostic allowing
anfoss BD35 and BD50 compressors have their own fault diagnostic allowing
anfoss BD35 and BD50 compressors have their own fault diagnostic allowing
anfoss BD35 and BD50 compressors have their own fault diagnostic allowing
anfoss BD35 and BD50 compressors have their own fault diagnostic allowing
anfoss BD35 and BD50 compressors have their own fault diagnostic allowing
anfoss BD35 and BD50 compressors have their own fault diagnostic allowing
anfoss BD35 and BD50 compressors have their own fault diagnostic allowing
easy fault finding.
easy fault finding.
easy fault finding.
start or stops.
start or stops.
start or stops.
Start by Linking out the Thermostat
Start by Linking out the Thermostat
Start by Linking out the Thermostat
Start by Linking out the Thermostat
Start by Linking out the Thermostat
Start by Linking out the Thermostat
To ensure the thermostat is not causing problems put a link out between C and T
To ensure the thermostat is not causing problems put a link out between C and T
To ensure the thermostat is not causing problems put a link out between C and T
To ensure the thermostat is not causing problems put a link out between C and T
To ensure the thermostat is not causing problems put a link out between C and T
To ensure the thermostat is not causing problems put a link out between C and T
To ensure the thermostat is not causing problems put a link out between C and T
To ensure the thermostat is not causing problems put a link out between C and T
To ensure the thermostat is not causing problems put a link out between C and T
To ensure the thermostat is not causing problems put a link out between C and T
To ensure the thermostat is not causing problems put a link out between C and T
terminals this will force the compressor to run continually during testing.
terminals this will force the compressor to run continually during testing.
terminals this will force the compressor to run continually during testing.
terminals this will force the compressor to run continually during testing.
terminals this will force the compressor to run continually during testing.
terminals this will force the compressor to run continually during testing.
terminals this will force the compressor to run continually during testing.
terminals this will force the compressor to run continually during testing.
terminals this will force the compressor to run continually during testing.
terminals this will force the compressor to run continually during testing.
Connect the LED faul
Connect the LED faul
Connect the LED faul
Connect the LED fault diagnosis curcuit
If a
If an LED light is
light is connected between the
connected between the
connected between the
connected between the small positive
control box, as shown in the diagram above
control box
control box
as shown in the diagram above, it will flash an error code if the
as shown in the diagram above
as shown in the diagram above
as shown in the diagram above
compressor refuses to start.
compressor refuses to start.
compressor refuses to start.
compressor refuses to start.
Hint:
Hint:
An electrical multi meter can be used instead of an LED. Set the meter to
An electrical multi meter can be
An electrical multi meter can be
An electrical multi meter can be
An electrical multi meter can be
continuity (will also have a beep alarm when continuity is made). Put the
continuity (will also have a beep alarm when continuity is made). Put the
continuity (will also have a beep alarm when continuity is made). Put the
continuity (will also have a beep alarm when continuity is made). Put the
continuity (will also have a beep alarm when continuity is made). Put the
continuity (will also have a beep alarm when continuity is made). Put the
continuity (will also have a beep alarm when continuity is made). Put the
continuity (will also have a beep alarm when continuity is made). Put the
continuity (will also have a beep alarm when continuity is made). Put the
continuity (will also have a beep alarm when continuity is made). Put the
probes on the small + and the D terminal and the meter will sound or show
probes on the small + and the D terminal and the meter will sound or show
probes on the small + and the D terminal and the meter will sound or show
probes on the small + and the D terminal and the meter will sound or show
probes on the small + and the D terminal and the meter will sound or show
probes on the small + and the D terminal and the meter will sound or show
probes on the small + and the D terminal and the meter will sound or show
probes on the small + and the D terminal and the meter will sound or show
probes on the small + and the D terminal and the meter will sound or show
probes on the small + and the D terminal and the meter will sound or show
a signal.
a signal.
Interpreting
Interpreting
Interpreting the results
1 Flash
1 Flash
Low Voltage
Low Voltage
There is insufficient voltage reaching the fridge compressor.
There is insufficient voltage reaching the fridge compressor.
There is insufficient voltage reaching the fridge compressor.
There is insufficient voltage reaching the fridge compressor.
There is insufficient voltage reaching the fridge compressor.
There is insufficient voltage reaching the fridge compressor.
There is insufficient voltage reaching the fridge compressor.
There is insufficient voltage reaching the fridge compressor.
Page 1
Page
Registered in England
Registered in England No: 4310267
Registered in England
No: 4310267
No: 4310267
No: 4310267
No: 4310267
No: 4310267
Havant
Havant
Hants
Hants
The fault code will only be shown when
The fault code will only be shown when
The fault code will only be shown when
The fault code will only be shown when
The fault code will only be shown when the compressor fails to
t diagnosis curcuit
t diagnosis curcuit
results
Suppliers of
Suppliers of
PO9 1QY
small positive (+) and
small positive
it will flash an error code if the
it will flash an error code if the
it will flash an error code if the
it will flash an error code if the
used instead of an LED. Set the meter to
used instead of an LED. Set the meter to
used instead of an LED. Set the meter to
used instead of an LED. Set the meter to
used instead of an LED. Set the meter to
the compressor fails to
the compressor fails to
the compressor fails to
and D terminal
terminal on the
VAT No: GB 785 5650 85
VAT No: GB 785 5650 85
VAT No: GB 785 5650 85
the