DUO-FAST DF175-CN 사용 설명서 및 회로도 - 페이지 4
{카테고리_이름} DUO-FAST DF175-CN에 대한 사용 설명서 및 회로도을 온라인으로 검색하거나 PDF를 다운로드하세요. DUO-FAST DF175-CN 12 페이지. Cap nailer
페이지 인쇄SAFETY INSTRUCTIONS
IMPORTANT: - Failure to observe basic safety rules or precautions are
the cause of most accidents related to the operation and maintenance of
the nailer.
NOTE:
- Accidents can be avoided by recognizing a potentially
hazardous situation before it occurs and by observing the safety
procedures.
-
DANGER
Read this manual and understand all safety instructions before operating
this tool.
Never use hydrogen, oxygen, carbon dioxide or any other bottled gases as a
power source for this tool. Use filtered, lubricated, compressed air only.
Never use gasoline or other flammable liquids to clean this tool. Vapors can
be ignited by a spark and could cause the tool to explode.
Do not exceed maximum recommended air pressure of the tool (120 psi).
8.3
ALWAYS disconnect the tool from air supply before clearing jams, servicing,
adjusting and during non-operation.
Do not keep the trigger pulled on contact safety mechanism when carrying
or holding the tool. Never carry the tool by the hose or pull the hose to move
the tool.
Always wear eye protection (ANSI Z87.1 safety glasses) when operating the
tool. Be sure everyone in your work area is wearing the same type of eye
protection.
Do not use a check valve or any other fitting which allows air to remain in
the tool.
Never point any operational fastener driving tool at yourself or at any other
person.
Never load fasteners with trigger or safety element depressed.
Always consider the tool "loaded" when air is connected.
(2)