DUO-FAST DF150-CS 사용 설명서 및 회로도 - 페이지 14

{카테고리_이름} DUO-FAST DF150-CS에 대한 사용 설명서 및 회로도을 온라인으로 검색하거나 PDF를 다운로드하세요. DUO-FAST DF150-CS 16 페이지. Cap stapler

OPERATOR TROUBLESHOOTING

PROBLEM

Fasteners will not drive completely into wood.

Fasteners penetrate properly during normal

operation, but won't drive fully at faster speeds.

Fasteners drive too deeply into wood.

Tools skips during operation - no fasteners are

driven from time to time.

Tool operates, but no fasteners are driven.

No cap feed.

Air leaks when tool is connected to air.

CAUTION

Disconnect the tool when performing

repairs or clearing jams.

CORRECTIVE ACTION

Adjust work contacting element (retract length).

Increase air pressure (do not exceed 120 psi).

Increase air ﬂow to tool -- use larger air lines.

Adjust work contacting element (extend length).

Reduce air pressure.

Check magazine for proper fasteners. Magazine fol-

lower should slide freely. Clean as needed to remove

debris.

Make sure correct fasteners are being used.

Use fasteners that meet

only.

Increase air ﬂow to tool -- use larger air lines.

Adjust work contacting element.

Check magazine for proper fasteners. Fasteners

should slide freely with no follower pressure.

Increase air pressure (do not exceed 120psi).

Check Cap feed switch to make sure it is in the cap

feed position.

Cap chain may be broken in track. Thread caps from

canister to pusher.

Tighten screws and fittings.

Duo-Fast

speciﬁcations