DUO-FAST DFCR175C 운영 매뉴얼 - 페이지 6

{카테고리_이름} DUO-FAST DFCR175C에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DUO-FAST DFCR175C 18 페이지. Cordless roofing coil nailer

페이지 인쇄

1. Eye protection must meet the requirements of ANSI

Standard Z87.1 and should have side shields for

increased protection.

2. NEVER ASSUME THE TOOL IS EMPTY.

Never point the tool at yourself or anyone else.

3. NEVER ENGAGE IN "HORSEPLAY" WITH THE TOOL.

The Cordless Roofing Nailer is not a toy – it is a

tool. Careless and improper use may result in a

serious accident.

4. NEVER CARRY THE TOOL WITH YOUR FINGER ON,

OR SQUEEZING, THE TRIGGER.

This practice may result in the accidental discharge of

a fastener.

5. NEVER OPERATE A MALFUNCTIONING TOOL.

Refer to the servicing or troubleshooting section of this

manual to correct the problem. If the problem cannot be

corrected, stop using the tool and report it to your

supervisor or Duo-Fast

6. DO NOT LOAD FASTENERS WITH THE TRIGGER

AND/OR WORK CONTACTING ELEMENT PRESSED

IN.

A fastener may be accidentally discharged.

WARNING

Always wear EYE and

EAR safety gear when

working with or in the

vicinity of the Duo-Fast

Cordless R o o f i n g

Nailer.

representative.

7. NEVER REMOVE OR DISABLE THE WORK

CONTACTING ELEMENT.

This device helps reduce the possibility of accidental

fastener discharge by preventing the tool from operating

until it is completely against the work surface.

NEVER operate the tool if the work contacting element

is not working properly.

8. ALWAYS

POINT

YOURSELF AND

JAMS OR REMOVING FASTENERS.

9. NEVER OPERATE THE CORDLESS ROOFING

NAILER IF PARTS ARE LOOSE, DAMAGED OR

MISSING.

10. DO NOT DRIVE FASTENERS INTO KNOTS OR ON

TOP OF OTHER FASTENERS.

A fastener may ricochet and cause serious injury.

11. OPERATE THE TOOL ONLY ON THE WORKPIECE.

Safety Instructions

THE TOOL AWAY FROM

OTHERS

WHEN

CLEARING

WARNING

The Duo-Fast

Roofing Nailer should be

operated only when it is

in contact with the work

surface.

Cordless