Casio fx-7400G 부록 - 페이지 6

{카테고리_이름} Casio fx-7400G에 대한 부록을 온라인으로 검색하거나 PDF를 다운로드하세요. Casio fx-7400G 16 페이지. 6. list function
Casio fx-7400G에 대해서도 마찬가지입니다: 매뉴얼 (19 페이지), 기능 설명서 (16 페이지)

페이지 인쇄

u u u u u To replace the memory back up battery

* Before replacing the memory back up battery, switch on the unit and check to

see if the "Low battery!" message appears on the display. If it does, replace the

main power supply batteries before replacing the back up power supply battery.

* Never remove the main power supply and the memory back up batteries from

the unit at the same time.

* Be sure to switch the unit off before replacing batteries. Replacing batteries with

power on will cause data in memory to be deleted.

* Be sure to replace the back up power supply battery at least once 2 years, re-

gardless of how much you use the unit during that time. Failure to do so can

cause data in memory to be deleted.

1. Press !O to turn the calculator off.

2. Push the battery compartment cover on the

back of the calculator in the direction noted in

the illustration and remove it.

3. Remove screw

tor, and remove the back up battery holder.

4. Remove the old battery.

5. Wipe off the surfaces of a new battery with a

soft, dry cloth. Load it into the calculator so

that its positive (+) side is facing up.

6. Pressing down on the battery with the battery

holder, replace the screw that secures the

holder in place.

7. Replace the battery compartment cover and

press o to turn power on. The main battery

provides power to the memory while the back-

up batteries are removed, so memory data is

not lost.

k k k k k About the Auto Power Off Function

The calculator switches power off automatically if you do not perform any key opera-

tion for about 6 minutes. To restore power, press o.

The calculator automatically turns off it is left for about 60 minutes with a calculation

stopped by an output command (^), which is indicated by the "–Disp–" message on

the display.

on the back of the calcula-

Appendix

174