Casio fx-7400G PLUS 부록 - 페이지 5

{카테고리_이름} Casio fx-7400G PLUS에 대한 부록을 온라인으로 검색하거나 PDF를 다운로드하세요. Casio fx-7400G PLUS 15 페이지. Chapter 9 - data communications
Casio fx-7400G PLUS에 대해서도 마찬가지입니다: 제품 카탈로그 (16 페이지), 사용자 설명서 (13 페이지), 사양 (1 페이지), 사양 (1 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (15 페이지), 사용 설명서 (13 페이지), 사용 (2 페이지)

페이지 인쇄

(Should a battery leak, clean out the battery compartment of the unit immedi-

ately, taking care to avoid letting the battery fluid come into direct contact with

your skin.)

Keep batteries out of the reach of small children. If swallowed, consult with a

physician immediately.

u u u u u To replace the main power supply batteries

* Never remove the main power supply and the memory back up batteries from

the unit at the same time.

* Be sure to switch the unit off before replacing batteries. Replacing batteries

with power on will cause data in memory to be deleted.

* Never replace the back cover or switch the calculator on while the main power

supply batteries are removed from the calculator or not loaded correctly. Doing

so can cause memory data to be deleted and malfunction of the calculator. If

mishandling of batteries causes such problems, correctly load batteries and

then perform the RESET operation to resume normal operation.

* Be sure to replace all two batteries with new ones.

1. Press !O to turn the calculator off.

2. Making sure that you do not accidently press the o key, attach the case to the

calculator and then turn the calculator over.

3. Remove the back cover from the unit by pull-

ing with your finger at the point marked

4. Remove the two old batteries.

5. Load a new set of two batteries, making sure

that their positive (+) and negative (–) ends

are facing in the proper directions.

6. Replace the back cover and press o to turn

power on. The memory back-up battery pro-

vides power to the memory while the main

batteries are removed, so memory data is not

lost.

✩

Appendix

197