Duo-Therm 59516.531 설치 지침 매뉴얼 - 페이지 10
{카테고리_이름} Duo-Therm 59516.531에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duo-Therm 59516.531 17 페이지. Roof top air conditioner/heat pump
Duo-Therm 59516.531에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (17 페이지)
페이지 인쇄
A. Remove parts package, control box and thermostat from the 3107541.XXX or 3107546.XXX Control Kit carton.
B. Freeze Control Installation 579, 590, 591, & 595 Series Brisk Air Models (See FIG. 7.)
1. Snap freeze control into place on return bend located at left side of evaporator coil as follows:
a. Locate "D" shaped notch in flange of evaporator coil.
b. Place the horseshoe end of the freeze control through this notch and snap onto the coil return bend. When positioned
correctly, control wires will be 90
c. Remove installation notice hang tag from freeze control.
C. Freeze Control installation on 600 Series Penguin Models (See FIG. 8.)
1. Snap freeze control into place on return bend located at right side of evaporator coil as follows:
a. Locate "D" shaped notch in flange of evaporator coil.
b. Place the horseshoe end of the freeze control through this notch and snap onto the coil return bend. When positioned
correctly, control wires will be 90
c. Remove installation notice hang tag from freeze control.
ANALOG DUCTED INSTALLATION INSTRUCTIONS
8. INSTALLATION OF COLD CONTROL
0
to direction of coil fin surface.
Brisk Air Model Series
FIG. 7
579, 590, 591, & 595
Coil
Return
Bend
Freeze Control
With Wires To Left Side
0
to direction of coil fin surface.
Penguin Model Series 600
FIG. 8
Remove
Hang Tag
Freeze Control
With Wires To Right Side
Remove
Hang Tag
Coil
Return
Bend
10