Duobond 380012 매뉴얼 - 페이지 4
{카테고리_이름} Duobond 380012에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duobond 380012 9 페이지. Windshield removal
페이지 인쇄
Machine specific safety instructions
Users must have had a training / explanation before use by a representative appointed
by DB Imagineering BV.
Place the drive unit on the glass before switching on.
Always wear safety goggles because of possible cutting hazards.
If explosive or even flammable substances arise during cutting, then the processing instructions
of the material manufacturer must be adhered to unconditionally.
Harmful / toxic substances may occur during work. Touching or inhaling these substances can be dangerous
for those who operate the machine or for persons near the machine.
Observe the safety regulations that apply in your country.
Electrical connection and commissioning
The voltage must correspond to the indication on the rating plate.
To switch on, the switch on the remote control is pressed continuously.
Releasing the switch is sufficient to switch the device off again.
Maintenance
When working on the machine, the power plug must always be removed from the socket!
All maintenance and repair work, for which it is required to open the motor housing,
may only be carried out by an authorized maintenance workshop.
Customer service and repair: only by manufacturer or service workshops, nearest addresses
can be found at: www.duobond.com
Only use original Duobond spare parts! Order at www.duobond.com
Special hazard description for the environment
Do not dispose of power tools with household waste! Enter the device, accessories and packaging
in an environmentally friendly way! Please observe the applicable national regulations.
EU only: According to the European Directive 2002/96 / EC, old electrical appliances must be separated
collected and disposed of in an environmentally friendly way.
www.duobond.com
4 of 9