Casio KL-60 - Label Printer 사용자 설명서 - 페이지 16
{카테고리_이름} Casio KL-60 - Label Printer에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Casio KL-60 - Label Printer 20 페이지. Casio label printer user's guide kl-60
Casio KL-60 - Label Printer에 대해서도 마찬가지입니다: 제품 카탈로그 (16 페이지)
페이지 인쇄
Troubleshooting
Power Supply
Nothing appears on the display.
Possible Cause
Low batteries
Replace batteries.
Batteries loaded
Remove batteries and reload them correctly.
incorrectly
Text Input
Cannot input text.
Possible Cause
FUNC key has been
Press ESC to clear FUNC key operation.
pressed.
Tape does not come out when PRINT is pressed.
Possible Causes
Back cover is not closed
Securely close the back cover.
completely.
No more tape left in the
Replace the tape cartridge with a new one.
cartridge.
Tape jam
Remove the tape cartridge and pull out the
jammed tape by hand. Cut off excess tape
with scissors, and carefully replace the
cartridge into the label printer.
Important!
Never allow the tape outlet to become
blocked and never touch tape as it is being
fed during printing.
Action
Action
Action
Tape comes out when PRINT is pressed, but nothing is printed on it.
Possible Cause
Only blank spaces were
Input the text you want to print.
input.
Printing is blurred, blotched, broken, etc.
Possible Causes
Improper print density
Adjust the print density setting.
setting
Improper loading of the
Remove the tape cartridge and reload it
cartridge
correctly.
Dirty print head or rubber
Clean the printer head and roller.
roller
Ink ribbon is being fed from the tape outlet along with the tape.
Possible Cause
Tape cartridge loaded
Remove the tape cartridge and check to
while the ink ribbon is
make sure the ink ribbon is not broken. Next,
slack.
take up any slack in the ink ribbon and then
reload the tape cartridge.
Important!
Before loading a tape cartridge into the
label printer, always make sure you take
up any slack in the ink ribbon first.
If the ink ribbon is broken, you must
change to another tape cartridge.
Action
Action
Action
E-15