AudioCodes Mediant 1000B 빠른 설정 매뉴얼 - 페이지 2
{카테고리_이름} AudioCodes Mediant 1000B에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioCodes Mediant 1000B 8 페이지. Gateway & e-sbc
AudioCodes Mediant 1000B에 대해서도 마찬가지입니다: 빠른 매뉴얼 (2 페이지), 구성 참고 사항 (20 페이지)
페이지 인쇄
Physical Description of Front Panel
[The number and type of port interfaces depend on your ordered hardware configuration.]
1
FXS, FXO, BRI,
Telephony port interfaces and DSP resources, which can include any one or a
TRUNKS, &
combination of FXS (RJ-11), FXO (RJ-11), ISDN BRI (RJ-45), ISDN PRI (RJ-48), and
MPM
Media Processing Module (MPM) interfaces.
FXS port status LED:
FXO port status LED:
BRI port status LED
PRI (E1/T1) port status LED:
Green On
Phone is in off-hook position.
Green Flashing
Phone is ringing.
Red On
Off
Phone is in on-hook position or no power.
Green On
FXO line with PBX is in off-hook position.
Green Flashing
Ringing is detected from PBX.
Red On
Off
FXO line is in on-hook position or no power.
Green On
Physical Layer 1 is synchronized (normal operation).
Red On
Physical Layer 1 is not synchronized.
Off
BRI trunk is not active.
Green On
Trunk is synchronized (normal operation).
Red On
Loss due to one of the following signals:
Off
Failure or disruption in power supply or power is not
being supplied to the device through the power supply
entry.
2 |
P a g e
Malfunction in line or out of service due to Serial
Peripheral Interface (SPI) failure.
Port is disabled.
Malfunction in line or out of service due to SPI
failure.
Port is disabled.
LOS (Loss of Signal)
LOF (Loss of Frame)
AIS (Alarm Indication Signal - Blue Alarm)
RAI (Remote Alarm Indication - Yellow Alarm)