AudioCodes Mediant 3100 빠른 설정 매뉴얼 - 페이지 6

{카테고리_이름} AudioCodes Mediant 3100에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioCodes Mediant 3100 10 페이지. Sbc and gateway

Powering the Device

The device can be powered from a standard alternating current (AC) electrical wall outlet or a DC power

source.

1. GROUNDING:

Ground (earth) the device by crimping an electrically earthed strap of 8-AWG (minimum)

wire into the grounding lug (supplied), and then attaching the grounding lug to the chassis, as shown in

the following figure, making sure that the spring washer is located between the screw head and the

lug. Connect the other end of the grounding wire to the building's protective earth (in accordance with

regulations enforced in the country of installation).

2. AC POWER:

For each Power Supply module, connect the line socket of the AC power cord (supplied) to

the device's AC power inlet, located on the rear panel. Connect the plug at the other end of the AC

power cord to a standard electrical wall outlet.

6 |

P a g e