Free2Move eSolutions Annex 설치 매뉴얼 - 페이지 8
{카테고리_이름} Free2Move eSolutions Annex에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Free2Move eSolutions Annex 11 페이지. Advanced functionalities setup
Free2Move eSolutions Annex에 대해서도 마찬가지입니다: 설치 매뉴얼 (14 페이지)
페이지 인쇄DPM
Power
value
of
the
customer.
It's
after
the
installation
supplied.
•
DPM enabling: click on the toggle to activate the functionality
•
DPM Pmax: use the scrolling button to set the value of the user
contractual power
DPM Type selection
Select from the drop down menu the Power Meter model installed. Only Power Meters
compatible with the type of wallbox installation will be shown.
Transformer ratio KI
set the Current Transformer ratio according to the values printed on the installed
sensors. E.g. 100/5: Ki = 20
Once the functionality is enabled, to make the changes effective, always restart
the wallbox through the dedicated button in the hompage.
Installation manual - Annex
A d v a n c e d f u n c t i o n a l i t i e s s e t u p
the
electricity
supply
an
optional
functionality
of
the
Power
contract,
also configurable
to
be
enabled
Meter
and
current
by
only
sensors