AudioCodes 420HD 빠른 매뉴얼 - 페이지 4
{카테고리_이름} AudioCodes 420HD에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioCodes 420HD 4 페이지. Ip phone with microsoft lync server
AudioCodes 420HD에 대해서도 마찬가지입니다: 빠른 매뉴얼 (4 페이지), 빠른 매뉴얼 (2 페이지), 빠른 매뉴얼 (2 페이지)
페이지 인쇄
7. Changing your Lync Presence Status
To change your presence:
(when LCD is in idle mode), scroll down to the required presence,
and then press the Select softkey.
To have Lync Server automatically update your presence:
Press Status softkey (when LCD is in idle mode) and select Reset.
8. Basic Phone Operation
To make a call:
Pick up the handset, enter a phone number and then press the Dial softkey. To call a
phone contact, press the directory icon softkey, select the contact and then press the Dial softkey.
To redial a number:
To answer a call:
To place a call on hold and make another call:
press the Dial softkey. To return to the held call, press the down key and press the Resume softkey.
To mute a call:
Press the mute key. To resume the conversation, press the mute key again.
To transfer a call:
phone number to transfer the call to, and then press the Dial or Trans softkey.
To forward incoming calls to another phone:
1.
Press the Forward softkey (when LCD is in idle mode), scroll down and select Forward to a Number.
2.
Enter the number to where you want to forward calls, and then press the Start softkey. To deactivate
call forwarding, press the Forward softkey and then select Do not forward calls.
This Quick Guide describes the quick setup for AudioCodes 420HD IP Phone Version 2.0.x. If you have a later
version, verify with AudioCodes that the information in this document is compatible with your IP Phone.
Information contained in this document is believed to be accurate and reliable at the time of printing. However,
due to ongoing product improvements and revisions, AudioCodes cannot guarantee accuracy of printed material
after the Date Published nor can it accept responsibility for errors or omissions. Updates to this document and
other documents as well as software updates can be viewed by registered customers on AudioCodes' Web site at
www.audiocodes.com/downloads.
Press the Status softkey
Press the REDIAL key, select a dialed number, and then press the Dial softkey.
Pick up the handset, or press the speaker or headset key.
During a call, press the
Notice Information
© Copyright 2015 AudioCodes Ltd. All rights reserved.
This document is subject to change without notice.
Date Published: June-01-2015
Document #: LTRT-11844
International Headquarters
1 Hayarden Street, Airport City, Lod 7019900
P.O. Box 255, Ben Gurion Airport, Israel, 7019900
Tel: +972-3-976-4000 Fax: +972-3-976-4040
Presence
Press the New Call softkey, enter a phone number and
softkey, navigate to Trans or Blind transfer, enter the