AudioCodes 450HD 설치 매뉴얼

{카테고리_이름} AudioCodes 450HD에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioCodes 450HD 6 페이지. Expansion unit
AudioCodes 450HD에 대해서도 마찬가지입니다: 빠른 매뉴얼 (4 페이지), 빠른 매뉴얼 (12 페이지)

페이지 인쇄

AudioCodes 450HD IP Phone Expansion Unit

1. Before Installing

Congratulations on purchasing the Expansion Module for your AudioCodes 450HD IP Phone!

Before installing it, make sure the following items are included in the shipped box:

Expansion Module



Kit containing five screws



2. Installation Process

Note:

Before proceeding with the installation:

•

Disconnect the phone from the Power Supply / Power over Ethernet (PoE)

•

Obtain a Philips screwdriver

 To connect the Expansion Module to the 450HD phone:



Step 1: Prepare the two units – see



Step 2: Remove the phone's side panel – see

Step 3: Connect the Expansion Module to the phone – see



Step 4: Attach the panel removed from the phone in Step 3, to the Expansion Module – see



Step 5: Secure the assembly – see



Step 6: Install the Expansion Module's base stand and the phone's base stand - see



Step 7: Mount the assembled unit - see



Installation Guide

here

1 |

P a g e

here