FREECALL ipcall-200 사용자 설명서 - 페이지 8

{카테고리_이름} FREECALL ipcall-200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. FREECALL ipcall-200 13 페이지. For dhcp router user only
FREECALL ipcall-200에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (2 페이지)

페이지 인쇄

it is required to modify the parameters manually when you are the 1

phone.

2.2.1. Setting for MODEM mode

Press the MENU key, and press the

"3 Network". Then press the Enter key three times, the LCD screen will display

the current mode like" DHCP".

Press the RIGHT of navigator keys to find until screen shows "<>PPPoE". Press

the same key that showing "Save" to accept， LCD responds "Saved" and now the

Net mode is changed for the Modem. Press QUIT key four times to exit for

ON-HOOK mode.

Follow a several steps to finish the setting. To do this, press the MENU key, and

DOWN

press the

"1. PPPoE SET" appear. Then press ENTER and LCD shows "Account". Press

EDIT once, you can input your Account Name which you use it to subscribe for

accessing internet through the keyboard according to the method described in the

in the 3.1.2 paragraph below "

input, press SAVE and then press QUIT once. Now you will see "2. Password" and

press NEXT then ENTER, EDIT, here you have to input your Password as you use

it to subscribe for accessing internet through the keyboard. Press SAVE and then

press QUIT 5 times to complete the setting.

4. After back to ON hook mode, LCD will show "Negotiating...", means that phone

is still trying to build a connection with server and does not find it yet. The phone

will not work at this status. If it does finish the subscription, the current time will

display, means your ISP server (Your Internet provider) has been detected

successfully and is ready to work. Now you can make a call.

5. Let your PC to share the internet in the same network. Connect the cable from PC

to the LAN port on rear of IPcall-200. Now the phone works like a normal router in

this network. So that you need to change the Network Setting from the control

panel on PC. Open the option of Network Setting, then select the tab of

"Connection", remove the previous setting item from "Dial Up and Private VPN

network dialog " box and disable this option. Activate the lower option "Local

LAN" setting and select the "Auto-detect IP" from the Local LAN setting page.

Then, your PC will get the dynamic IP from the phone-"Router" to access to

internet successfully.

3. Basic Functions

3.1. Basic operation

key twice, then ENTER key twice, NEXT key twice, now you see

Digit-character map table".

DOWN

key twice, the LCD screen will display

time to use this

After done for