AudioCodes M500Li 구성 매뉴얼 - 페이지 6

{카테고리_이름} AudioCodes M500Li에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioCodes M500Li 15 페이지. Voice gateway basic configuration

1. Getting Started with Initial Connectivity

Getting Started with Initial Connectivity

1.1

This part describes how to initially access the device's management interface and change its

default IP address to correspond with your networking scheme.

Device management can always be done through the LAN interface. It can also be

enabled for the WAN interface as explained in section 1.3.2,

Interface

1.2

This section describes initial access to the device's management interface.

1.2.1

You can access the Web- based management interface using the device's default LAN IP address:

By default, the device's embedded DHCP server is enabled for the LAN, and with default

IP pool addresses relating to the default subnet LAN. The DHCP server allocates this pool

of IP addresses to computers connected to its LAN interface. You can disable the DHCP

server or modify the IP address pool.

on page 7.

Table 1-1:

Default LAN IP Address

Networking Parameter

IP Address

Prefix Length

Default Gateway

VLAN ID

- 4 -

Configuring the WAN

Default Value

192.168.0.1

24 (255.255.255.0)

0.0.0.0

M500Li Analog VoIP Gateway