AudioCodes Mediant 4000B 빠른 설정 매뉴얼 - 페이지 5
{카테고리_이름} AudioCodes Mediant 4000B에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioCodes Mediant 4000B 10 페이지. Session border controller
페이지 인쇄
Connecting to DC power source:
1.
Connect the open ends of the two wires on the DC power feed cable (supplied) to the DC power
source. Make sure that the wires are connected to the correct polarity (black wire negative;
positive).
2.
Plug the DC power feed cable, crimped to the terminal block, into the DC inlet of one of the Power
Supply modules, located on the rear panel. Make sure that the hook on the terminal block snaps into
the groove above the inlet.
3.
Repeat the above steps for the second Power Supply module, but connect it to a different DC power
source.
5 |
P a g e
red
wire