3Ware 3WARE 9650SE 설치 매뉴얼 - 페이지 4

{카테고리_이름} 3Ware 3WARE 9650SE에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Ware 3WARE 9650SE 4 페이지. Remote battery board
3Ware 3WARE 9650SE에 대해서도 마찬가지입니다: 사용자 설명서 부록 (1 페이지), 사양 (7 페이지), 사용자 설명서 (11 페이지)

페이지 인쇄

Remote Battery Installation Guide

Insert the remote battery board in the chosen expansion slot and

secure the bracket with the screw you removed in step 2. (Note

that the remote battery board does not have a connector that

inserts into a slot on the motherboard).

Figure 3. Inserting the boards and connecting the battery power

to the BBU control module

10 Insert the battery power connector into the power receptacle on

the BBU control module, as shown above (Figure 3).

If you need a longer cable on the power connector, use the

extension cable to connect the battery to the power receptacle

on the BBU.

Note:

The battery will drain if it is plugged into the BBU and there

is no power to the unit. Wait to plug the battery into the BBU until

the system is ready for use.

3ware®, 3DM® are registered trademarks of AMCC. The 3ware logo, 3BM, StorSave are all

trademarks of AMCC. All other trademarks herein are property of their respective owners.

While every attempt is made to make this document as accurate as possible, AMCC assumes

no responsibility for errors or omissions in the document and shall not be responsible or

liable for any and all damages, claims and/or disputes that arise from dependence on this

publication.