AudioCodes RXVCam50 사용자 설명서 - 페이지 10
{카테고리_이름} AudioCodes RXVCam50에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioCodes RXVCam50 16 페이지. Video conference camera
AudioCodes RXVCam50에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지)
페이지 인쇄
13.
Setting Camera Address
F1, F2, F3, F4. Press the following
sequence to set an address:
Press * + # + F1 to set Camera Address 1
Press * + # + F2 to set Camera Address 2
Press * + # + F3 to set Camera Address 3
Press * + # + F4 to set Camera Address 4
Key Combinations
Press # + # + # to clear all presets
Press * + # + 6 to restore defaults
Press * + # + 9 to flip switch
Basic Operations
Pairing the RC with the Camera
1.
Connect the camera to the PC using a USB3.0
Type-A to Type-B cable.
2.
On the Remote control (RC), long-press the
SET and * keys simultaneously for three
seconds; the LED indicator on the RC starts
flashing.
Release the SET and * keys.
3.
4.
Unplug the USB cable from the camera for
one second and then plug it back in; the LED
indicator on the RC turns off.
Pairing has successfully completed.
10 |
P a g e