AudioCodes Mediant 500 빠른 설정 매뉴얼 - 페이지 2

{카테고리_이름} AudioCodes Mediant 500에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioCodes Mediant 500 8 페이지. And e-sbc

페이지 인쇄

Physical Description

POWER /

POWER LED

STATUS

STATUS LED

Reset pinhole button for resetting the device or restoring it to factory defaults. To

restore the device to factory defaults: with a paper clip or any other similar

pointed object, press and hold down the button for at least 12 seconds (but no

more than 25 seconds).

USB ports, which you can use for various functionalities such as storing the

configuration file on an external USB storage device.

CONSOLE

RS-232 serial interface port (RJ-45).

LAN

Up to four Gigabit Ethernet (10/100/1000Base-T) ports (RJ-45) for connecting IP

phones, computers, or switches. The ports support 1+1 Ethernet port redundancy

(active-standby), half- and full-duplex modes, auto-negotiation, and straight-

through or crossover cable detection.

PSTN

Single E1/T1 port interface (RJ-48).

Note: PRI interface is a separate-orderable item.

Green On

Power received by device

Off

No power

Green On

Device is operational

Green Flashing

Initial rebooting stage or software upgrade (.cmp file) in

process

Red On

Boot failure

Off

Advanced rebooting stage

Green On

Ethernet link established

Green Flashing

Data is being received or transmitted

Off

No Ethernet link

Green On

Trunk is synchronized (normal operation)

Red On

Loss due to LOS, LOF, AIS or RAI

Off

Failure or disruption in the AC power supply or no power

received by the device

2 |

P a g e