AudioCodes Mediant 500L MSBR 빠른 설정 매뉴얼 - 페이지 2

{카테고리_이름} AudioCodes Mediant 500L MSBR에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioCodes Mediant 500L MSBR 6 페이지. Multi-service business router
AudioCodes Mediant 500L MSBR에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (8 페이지)

AudioCodes Mediant 500L MSBR 빠른 설정 매뉴얼
Physical Description of Front Panel
[Note: Availability of certain LEDs depends on the ordered interface.]
1
Power
LED indicating power status:
2
Status
LED indicating operating status:
3
Wi-Fi
LED indicating Wi-Fi status:
4
WAN 4G
LED indicating 4G cellular WAN status
5
WAN 4G
LED indicating Gigabit Ethernet copper WAN status
6
WAN SPF
LED indicating optical fiber WAN link status:
7
WAN A/VDSL
LED indicating DSL WAN link status:
and then Idle Sequences
Green On
Off
Green On
Green Flashing
Red On
Off
Green On
Green Flashing
Off
Green On
Green Flashing
Red On
Off
Green On
Green Flashing
Off
Green On
Green Flashing
Off
Green On
Green Fast-Flashing
Green Slow Flashing
Green Two Fast-Flashes
Off
2 |
Power received by device
No power
Device is operational
Initial rebooting stage or software upgrade in process
Boot failure
Advanced rebooting stage
Wi-Fi is activated.
Traffic on the wireless LAN.
Wi-Fi is not configured.
Connected to cellular network.
Connecting to cellular network.
No SIM card in SIM slot, or if there is a SIM card, the
device cannot connect to the cellular network
Cellular interface is not configured (or not licensed)
WAN GE link established.
Data received or transmitted.
No WAN GE link.
WAN fiber link established.
Data received or transmitted.
No WAN fiber link.
DSL link connected (trained) with peer ("showtime").
Training up (connection in progress) and negotiating with
peer.
DSL port administratively up, but idle (not connected and
no peer detected).
DSL port initializing itself after being enabled or upon
mode change.
DSL port administratively shutdown or not configured
P a g e