Audiocom Audiocom BP-2002 사용 설명서 - 페이지 9

{카테고리_이름} Audiocom Audiocom BP-2002에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiocom Audiocom BP-2002 18 페이지. Beltpacks audicom intercom systems

The BP-1002/2002 beltpack receives power externally in one of two ways:

•

The intercom channel

•

The local power (pin 2) of the intercom channel connector (BP-2002

only)

Both the BP-1002 and BP-2002 will pass system power through to subsequent

beltpacks that are "daisy chained" together.

The channel termination is initially set for balanced operation, which is compatible

with other Audiocom

equipment, one switch must be changed as described in the section on Clear-Com

setup in this manual.

The headset microphone type is auto-sensing, which means it automatically

determines if an Electret or Dynamic headset is attached to the unit.

The microprocessor within the BP-1002/2002 controls four (4) modes of operation

that affect the Microphone Kill and Audible Call Alert features. These modes can be

seen in Table 1 on page 6.

equipment. If the unit is going to be connected to Clear-Com

CHAPTER 2

Operation