Audiocom MS-4002 사양

{카테고리_이름} Audiocom MS-4002에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiocom MS-4002 2 페이지. Master station and power supply

The MS-4002 is a complete 4-channel, balanced audio master station and 4-amp system power supply in a single unit. You

simply plug it into any AC power outlet from 100 to 240 volts, add a microphone or headset, connect intercom stations to the

back panel, and you're ready to communicate. The MS-4002 is now equipped with an Advanced programming Mode on the

front panel, eliminating the need for internal DIP switches. It also has a feature that automatically senses the type of headset

attached to the unit, either dynamic or electret. The MS-4002 fits in a standard 19-inch equipment rack and is 1 rack unit high.

The MS-4002 is Clear-Com compatible, with the ability to run in unbalanced mode.

Features

Auto-Sensing Headset Connector

The MS-4002 has a built-in autosensing headset connec-

tor that will determine automatically whether a dynamic or

electret headset is connected to the system.

Speaker Station or Headset Station

Use the built-in speaker for listening and add an optional

Telex MCP-90 series Gooseneck Panel Microphone for talk-

back. You can also turn off the speaker volume, and plug in a

headset for private communication.

Voice Activated Microphone (VOX)

Separate controls adjust the voice activation level for the

headset microphone and panel microphone inputs.

Public Address (PA) Output, with PA key

Use your intercom microphone to talk over a PA system.

Back-lit Keys

Improves visibility in low-light

Incoming Call Indications

Red flashing call light, with beep tone if desired.

Mic Kill Key

You can turn off all microphones on a channel to quickly

clear the channel.

Line Drawing

MS-4002

Master Station and Power Supply

Program Input for Each Channel

Connect any line-level audio source for monitoring in the

speaker or headset, or for routing to the intercom channel.

The program audio to the channel can be set to interrupt

while the MS-4002 operator is talking on the channel.

Listening with External Powered Speakers

You can connect external powered speakers and then moni-

tor channels 1, 2, 3 and 4.

Expandable

Add more channels by connecting optional EMS-4001

Expansion Stations. Each EMS-4001 adds four additional

powered channels (up to twenty channels).

Instantaneous Auto-Reset

Instantaneous Auto Reset (IAR), the newest technology in

performance and safety, which uses a revolutionary new

circuitry that dynamically monitors line fault conditions. Then,

when the fault is removed, automatically brings individual

power supply channels up.

Clear-Com Compatible

Can run in unbalanced mode.