AudioControl ACX-300.4 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} AudioControl ACX-300.4에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioControl ACX-300.4 11 페이지. Compact high power all-weather 4-channel amplifier

페이지 인쇄

Connection Panel Features

1. Speaker Output – Connect these wires to your speakers using

the included water resistant harness. Speaker wire may then be

crimped or soldered onto the bare leads. Use a decent sized wire

gauge as this baby is powerful!

2. Power Input Terminal +12V & Ground – Connect these wires

to the +12V and Negative binding posts of the vehicle battery

via one of two included harness options. You may use either the

included water resistant harness, or the included harness kit to

terminate your own custom-length water-resistant harness. Use

quality insulated wiring of the recommended wire gauge, such as

wire gauge 8 or thicker.

4 5

3. Remote Power Input Wire – This wire connects to the 12V

remote trigger output of some head units and controls the on/off

state of the amplifier. Alternatively, you can use the GTO™ feature

of the amplifier so it will turn on when an speaker level signal is

detected at the RCA inputs.

4. Power LED - When the unit has been powered on, the LED will

glow warmly red.

5. Input Level - Use this switch to specify which type of signal input

voltage type you are using - high is speaker level & low is the RCA

line level

6 7

9 10 1112 13