AudioControl ACX-600.1 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} AudioControl ACX-600.1에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioControl ACX-600.1 12 페이지. Compact high power all-weather mono amplifier

페이지 인쇄

8. Low Pass Crossover – A crossover allows you to match a speaker

to the frequency range it is designed to handle. Choosing the

crossover point recommended by the speaker manufacturer

will provide increased speaker reliability and optimum sound

quality. The ACX-600.1 amplifier has selectable low pass crossover

frequencies at 80 Hz, 120 Hz, and a "bypass" option. The amplifier

reproduces the frequency range below the selected crossover

frequency.

9. Gain Maximized LED – This LED indicates when the ACX-600.1

amplifier gain has been maximized for optimum performance.

With your source unit turned up to 75%, use your gain controls to

dial in the output by watching for this LED to shine, then back it

off just a touch.

10. AccuBASS® – This switch enables the renowned AccuBASS® bass

enhancement to work it's magic on the lower bass of speaker

outputs.

11. AccuBASS® Threshold – Sets the level at which AccuBASS® will

begin to work.

12. AccuBASS® Level – Adjusts the level of the AccuBASS® enhance-

ment circuitry.

13. Input Level – Use this switch to specify which type of signal input

voltage type you are using - high is speaker level & low is RCA line

level.

**Pro tip - if using speaker- level/high-level inputs, you'll

need some RCA ends on the ends of the speaker wire

to attached to the RCA inputs. Setting the Input Level

to High of course.

14. Remote Level Port – Using the cable that came with the ACX-

600.1, connect your optional ACR-1 level control knob here.

15. RCA Inputs – This is where you connect your source signal to. If

using low level signals, make sure your Input Level setting switch

is set to Low. If you are using high or speaker level signals, set your

Input Level to High.

14 15