Freedom KLARA 24555524 조립 지침 - 페이지 3

{카테고리_이름} Freedom KLARA 24555524에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Freedom KLARA 24555524 5 페이지. Dresser 6 drawer

KLARA Dresser 6 Drawer

24555524

Step 1

WARNING

THIS ITEM NEEDS TO BE FIXED TO A WALL

Please read these assembly instructions carefully as failure to adhere and non use of the

brackets may cause the product to move and possibly lead to damage and/or injury if

improperly fitted.lf in doubt consult a qualified technician.

1,Place the unit into required position.

2,Ensure unit is level before securing to the wall.

3,Place the wall fixing bracket into position.

4,Mark the location point for the wall bracket fixing screw on the unit top.

5,Insert strap (A) into the plastic holder (B) to secure the wall bracket

onto the unit top.

6,Please note that wall fixings such as wall plugs are not supplied-please secure

the unit to the wall using the appropriate fixings for your wall type.

These will be readily available from your DIY/Home improvement store.

www.freedom.com.au

www.freedomfurniture.co.nz

Page 3-5

Use recommended hardware

IMPORTANT!

Once completed, ensure that

all screws are firmly tightened.

This one is very important for

the safety of your product