Addmaster IJ-6000 프로그래밍 매뉴얼 - 페이지 4
{카테고리_이름} Addmaster IJ-6000에 대한 프로그래밍 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Addmaster IJ-6000 6 페이지. Ink-jet transaction printer
페이지 인쇄Addmaster IJ-6000
4. Downloading Fonts & Code Pages
Required Components:
Component
Download Program
Printer Font
Host Platform
Host OS
Downloading Procedure:
Step
Procedure
1.
Prepare PC.
•
Load all files to hard-drive.
•
Open MS-DOS command window.
2.
Prepare Printer.
•
Cable printer to PC's COM1: port.
•
Turn printer off.
3.
Put Printer into Downloading Mode.
•
Turn printer power
•
Set DIP Switch #1 to ON.
•
Turn printer on.
4.
Execute Download Program.
•
C:> ij6isp filename
•
Check any prompts given by program.
•
Hit Enter when ready to begin.
5.
Wait for Download completion.
6.
Execute any additional downloading.
•
Step #4 can be repeated if necessary.
•
Firmware can be downloaded at this
time.
•
Logos can be downloaded at this
time.
7.
Exit Downloading Mode.
•
Turn power off.
•
Set DIP Switch #1 to OFF.
8.
Test Download results.
•
Perform printer self-test.
•
Verify version and revision numbers.
Items Required
IJ6ISP.EXE
Ijft_nnn.mmm
PC with available COM1:
MS-DOS,
Win95/98/NT/2K/XP
Downloading Instructions
Notes
Program file
nn is Code Page
mmm is revision or .dat
Uses COM1 for RS232 comm.
Notes
When successful, all printer LED
indicators will flash. Don't go further
until flashing LED's are shown.
filename is the file containing the
font to be downloaded.
While downloading, all printer LED
indicators are ON continuously.
When downloading is complete and
successful, all printer LED's will
flash.
Unit returns to Downloading mode
for additional downloading.
Page 4