audiodata ArtTwo 사용자 설명서 - 페이지 11

{카테고리_이름} audiodata ArtTwo에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. audiodata ArtTwo 17 페이지.

6.1

Single-wiring connection option

For connecting the loudspeaker cables and/or cable jumpers, turn off your amplifier.

Ensure that both loudspeakers are correctly wired up and connected in phase.

Never join '+' and '-' connections together, as depending on its design this can seriously damage

your amplifier.

1. On both loudspeakers connect the cable jumpers supplied to the connection

terminals for 'High' and 'Low'.

a. To do this, connect the plus low frequency connection (red) to the right-

hand speaker's plus high frequency connection (red).

b. Then, connect the minus low frequency connection (black) to the right-

hand speaker's minus high frequency connection (black).

2. Using the right channel's plus cable (red), connect your amplifier's right-hand

plus terminal '

3. Using the right channel's minus cable (black), connect your amplifier's right-

hand minus terminal '

4. Proceed as above in the same way with your left-hand channel's loudspeaker.

ArtTwo

1st edition, January 2019

' to the plus connection '

–

' to the minus connection '

' on your right-hand speaker.

–

' on your right-hand speaker.

Page 11