Acer XD1170D 매뉴얼 - 페이지 35

{카테고리_이름} Acer XD1170D에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer XD1170D 47 페이지. Travel series; home series; value series; professional series
Acer XD1170D에 대해서도 마찬가지입니다: 브로셔 (6 페이지)

페이지 인쇄

Troubleshooting

If you experience trouble with the projector, refer to the

following information. If the problem persists, please

contact your local reseller or service center.

Problem: No image appears on screen.



Ensure all the cables and power connections are correctly and

securely connected as described in the "Installation" section.



Ensure the pins of connectors are not crooked or broken.



Check if the projection lamp has been securely installed. Please

refer to the "Replacing the lamp" section.



Make sure you have removed the lens cap and the projector is

switched on.



Ensure that the "Hide" feature is not enabled.

Problem: Partial, scrolling or incorrectly displayed image.



Press the "Resync" button on the Remote Control.



If you use a PC:

If the resolution of your computer is higher than 800 x 600. Follow

the steps outlined below to reset the resolution.

For Windows 3.x:

1. In the Windows Program Manager, click the "Windows Setup"

icon in the Main group.

2. Verify that your display resolution setting is less than or equal

to 800 x 600.

For Windows 95, 98, 2000, XP:

1. Open "My Computer" icon, the "Control Panel" folder, and

then double click on the "Display" icon.

2. Select the "Setting" tab.

3. In the "Desktop Area" you will find the resolution setting.

Verify that the resolution setting is less than or equal to 800 x

600 resolution.

If the projector is still not projecting the whole image, you will

also need to change the monitor display you are using. Refer to

the following steps.

Appendices

... English