Duplo 486P 운영 매뉴얼 - 페이지 18

{카테고리_이름} Duplo 486P에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duplo 486P 18 페이지.

11.9 Loosen the blade replacement holder screw a bit then remove the blade from blade carrier

11.10 Install a new blade onto blade replacement holder and fastening the hand screw onto the blade

mounting hole #2 and #4

11.11 Install new blade onto blade carrier and fasten it tight and secure

11.12 Fasten screw #1 and #3 half way in

11.13 Remove blade replacement holder

11.14 Fasten screw #2 and #4 half way in

11.15 Place 2 copy paper covering the cutting stick

11.16 Using 2-hand switch bring the blade all the way down then release right hand switch and turn

the key switch off

11.17 Fastening screw #5 half way in

11.18 Rotate the cam screw clockwise to let the blade cut the paper through evenly

11.19 Fastening #2, #3, #4 and #5 screw tight and secure

11.20 Bring the blade all the way up

11.21 Fastening screw #1 secure and tight

12. Cutting Stick Replacement

12.1 While blade is on home position, switch main power to off

12.2 Turn the anvil stick around, the anvil stick can be used 8 times, each surface can use 2 times

12.3 Replace a new stick; make sure the left hole is fit in the position pin