Freedom Enterprise Inter Continental Capacitive Ballistic Synth 소유자 매뉴얼 - 페이지 8
{카테고리_이름} Freedom Enterprise Inter Continental Capacitive Ballistic Synth에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Freedom Enterprise Inter Continental Capacitive Ballistic Synth 20 페이지.
페이지 인쇄
Notice that the electrolytic capacitors and the LED have polarities and must be
installed in the correct orientation according to the silkscreen on the Main PCB.
Solder these components and trim the leads.
Insert the IC sockets in their correct orientation.
Solder the sockets and only then install the provided ICs.
Insert the eight pin female header on the Main PCB and the eight pin male headers on
the User Interface. Secure the two PCBs with the provided brass standoff and screws and
solder the headers.
Finish off by cleaning the flux left behind and perform a visual inspection.
SIDE PANELS
The side wood panels can be installed by sliding them into the two tabs on the Main
PCB, with the mounting holes facing upward. Insert the aluminium standoff and then the
brass hex screws. Secure them tightly.
8