Freedom Innovations iQ 사용 설명서 지침 - 페이지 7

{카테고리_이름} Freedom Innovations iQ에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Freedom Innovations iQ 11 페이지. Vacuum device
Freedom Innovations iQ에 대해서도 마찬가지입니다: 사용자 설명서 (10 페이지), 설정 매뉴얼 (16 페이지)

페이지 인쇄

Freedom iQ Vacuum App For Prosthetists (iQ Vac App)

Dashboard

After connecting to an iQ Vacuum unit, an information Dashboard

summarizes key setup and performance indicators. The live graph

at the bottom of the screen shows you how the socket vacuum is

changing and how the vacuum is responding to the live changing

activity of the user.

Adjust Vacuum Levels

While iQ Vacuum is fully automatic, the amount of vacuum targeted

at different activity levels is adjustable by the prosthetist by selecting

Controls>Settings>Vacuum Level.

Initial Training

For optimal automatic function, iQ Vacuum must be trained to

recognize the unique gait of the user. Before training, you may choose

to alter the standard target vacuum levels. In the Freedom iQ Vacuum

select Controls>Settings>Step Detection Setup. The app will lead you

through the process of tuning the iQ Vacuum sensor.

The process can be repeated by the prosthetist at any time in the

future should there be a question about the performance of the

adaptive control system, or if the target vacuum levels are changed.

Freedom Innovations |

iQ Vacuum

| Instructions for Use

Step Detection Setup

To use Step Detection Setup, have the user walk continuously. Each

time that the device observes a step, the gray circle in the middle will

flash green and there will be an audible beep. Make sure the sound

on your mobile device is turned on and the volume is up. There should

be one flash/beep for each step you observe. Ignore starting, stopping

and turning steps. After watching the user for several steps, tap the

control on the screen that reflects if the device detected:"Too Few",

"Too Many" or "Just Right" number of steps. Continue the process until

it is "Just Right". Tap "Just Right" at the bottom of the screen. Be sure

to observe the user at a variety of cadences.

Adjust Target Step Rates

The vacuum level target increases with increasing activity levels

(Low, Medium, High) as defined by the target step rates. These are

adjustable by selecting Controls>Settings>Step Rate in the app menu.

You may want to increase the rate if you feel the device is going into

medium or high activity mode too early or you may want to decrease

the rates if the user does not achieve the higher activity levels.