Duplomatic EWM-BUS-DD series 10 시작 매뉴얼 - 페이지 7
{카테고리_이름} Duplomatic EWM-BUS-DD series 10에 대한 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duplomatic EWM-BUS-DD series 10 8 페이지. Can coupler
페이지 인쇄EWM-BUS-DD/10
Set the DIL-switch according to the configuration required by the chosen card for axes control.
The DIL switch is inside the module and it gives the possibility to set address and data transmission
speed.
ON
OFF
picture 1: example for Duplomatic EWM-SS-DAD card configuration
The tables below show the meaning of DIL Switches:
GSD configuration file
The .GSD file is available for download at www.duplomatic.com site, in the download section.
Display
The EWM-BUS-DD has a display that shows the module status:
Number
meaning
displayed
-
everything OK, Profibus and CAN Bus in data exchange
1
Error, CAN Bus no data exchange
2
Error, Profibus no communication
3
Error, Profibus no communication, CAN Bus no data exchange
4
Error, Profibus OK, not connected CAN Bus
5
Error, Profibus no communication, not connected CAN Bus
6
Error, hardware fault
Duplomatic MS ▪ EWM-BUS-DD/10 Start-up Manual – 80946/118 ETM --- Oct 2018
80946/118 ETM
| 7