Dangerous Music CONVERT-AD Plus 사용자 설명서 - 페이지 5

{카테고리_이름} Dangerous Music CONVERT-AD Plus에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dangerous Music CONVERT-AD Plus 19 페이지.

OVERVIEW

D/A Conversion has been an integral part of the Dangerous Music audio legacy since 2002, when the MONITOR® set the standard for mastering

engineers worldwide. With these golden eared luminaries satisfied, Dangerous has unleashed it's quality upon the world of A/D Conversion.

Designed without compromise, adhering only to the core philosophies of "transparent, yet musical" that have come to define Dangerous, the

Convert-AD+ is profoundly detailed, to capture your sound with a richly defined low end and an unparalleled clarity that holds true from the

midrange to the open top end. (Pronounced \kän-ˌvˌrt\ or KHAN-vert as in a person who has changed to a different religion, belief, etc...)

Unpack this auditory truth sayer and celebrate. Inside the box you'll find the Convert-AD+, this manual and a standard 3 Pin IEC power cable.

Note:

We recommend reading the entire manual (it's short- and so is life).

Convert-AD+: Front Panel Features & Benefits

1. SAMPLE RATE SELECT

[SAMPLE RATE SELECT SECTION PICTURED ABOVE]

Feature: Adjustable Sample Rate via the select switch.

Benefit: Cycle through the 6 sample rates and Auto Mode for universal compatibility with other devices.

Operation: For 88.2kHz both the 48kHz and 96kHz LEDs will light. For 176.4 both the 96kHz and 192kHz LEDs will light.

Tip:

Auto Mode detects the appropriate rate from an external source and selects it automatically (except for ADAT*)

Tip:

Lock Light turns green when the Convert-AD+ has achieved sync from an external source. (i.e. valid input data at selected

sample rate). Red means there is no valid connection.

*Note:

Since the ADAT lightpipe specification was never officially completed for sample rates above 48kHz, the sample rate must

be selected manually. If the base rate from the ADAT source (i.e. 44.1kHz vs. 88.2kHz or 48kHz vs. 96kHz) and front panel

settings match the lock light will turn green. If an incorrect base sample rate is selected, the lock light will turn red. The

CONVERT-AD+ |